Special parameters and shell variables

Expands to the full file name used to invoke the current instance of Bash.

A colon-separated list of enabled shell options.

Each word in the list is a valid argument for the -s option to the shopt builtin command. The options appearing in BASHOPTS are those reported as on by shopt. If this variable is in the environment when Bash starts up, each shell option in the list will be enabled before reading any startup files.

Example content:

cmdhist:expand_aliases:extquote:force_fignore:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath

This variable is read-only.

Always expands to the process ID of the current Bash process. This differs from the special parameter $ under certain circumstances, such as subshells that do not require Bash to be re-initialized.

An associative array variable whose members correspond to the internal list of aliases as maintained by the alias builtin. Elements added to this array appear in the alias list; unsetting array elements cause aliases to be removed from the alias list.

The associative key is the name of the alias as used with the alias builtin command.

An array variable whose values are the number of parameters in each frame of the current Bash execution call stack.

The number of parameters to the current subroutine (shell function or script executed with ''.'' or ''source'' builtin command) is at the top of the stack. When a subroutine is executed, the number of parameters passed is pushed onto BASH_ARGC.

An array variable containing all of the parameters in the current Bash execution call stack.

The final parameter of the last subroutine call is at the top of the stack; the first parameter of the initial call is at the bottom. When a subroutine is executed, the parameters supplied are pushed onto BASH_ARGV.

Expands to the name of the shell or shell script - as the special parameter $0 does. Assignments to BASH_ARGV0 causes the value to be assigned to $0.

If this parameter is unset, it loses its special properties, even if subsequently reset.

An associative array variable whose members correspond to the internal hash table of commands as maintained by the hash builtin command. Elements added to this array appear in the hash table; unsetting array elements cause commands to be removed from the hash table.

The associative key is the name of the command as used with thehash builtin command.

The command currently being executed or about to be executed, unless the shell is executing a command as the result of a trap, in which case it is the command executing at the time of the trap.

The value is used to set the shell's compatibility level. The value may be a decimal number (e.g., 4.2) or an integer (e.g., 42) corresponding to the desired compatibility level. If BASH_COMPAT is unset or set to the empty string, the compatibility level is set to the default for the current version. If BASH_COMPAT is set to a value that is not one of the valid compatibility levels, the shell prints an error message and sets the compatibility level to the default for the current version. The valid compatibility levels correspond to the compatibility options accepted by the shopt builtin. The current version is also a valid value.

The command argument to the -c invocation option.

An array variable whose members are the line numbers in source files corresponding to each member of FUNCNAME.

${BASH_LINENO[$i]} is the line number in the source file where ${FUNCNAME[$ifP]} was called. The corresponding source file name is ${BASH_SOURCE[$i]}. Use LINENO to obtain the current line number.

An array variable whose members are assigned by the =~ binary operator to the [[ conditional command.

The element with index 0 is the portion of the string matching the entire regular expression. The element with index n is the portion of the string matching the nth parenthesized subexpression.

Before Bash version 5.1-alpha this variable was readonly.

An array variable whose members are the source filenames corresponding to the elements in the FUNCNAME array variable.

Incremented by one each time a subshell or subshell environment is spawned. The initial value is 0.

A readonly array variable whose members hold version information for this instance of Bash. The values assigned to the array members are as follows:

Expands to a string describing the version of this instance of Bash.

Since Bash 2.0 it includes the shell's "release status" (alpha[N], beta[N], release).

Set the number of exited child status values for the shell to remember. Bash will not allow this value to be decreased below a POSIX-mandated minimum, and there is a maximum value (currently 8192) that this may not exceed. The minimum value is system-dependent.

An index into COMP_WORDS of the word containing the current cursor position.

The key (or final key of a key sequence) used to invoke the current completion function.

The current command line.

The index of the current cursor position relative to the beginning of the current command. If the current cursor position is at the end of the current command, the value of this variable is equal to ${#COMP_LINE}.

Set to an integer value corresponding to the type of completion attempted that caused a completion function to be called:

where are the integer values?

Reports the set of characters that the readline library treats as word separators when performing word completion.

If this parameter is unset, it loses its special properties, even if it is subsequently reset.

An array variable consisting of the individual words in the current command line. The line is split into words as readline would split it, using COMP_WORDBREAKS as described above.

An array variable created to hold the file descriptors for output from and input to an unnamed coprocess.

An array variable containing the current contents of the directory stack.

Directories appear in the stack in the order they are displayed by the dirs builtin. Assigning to members of this array variable may be used to modify directories already in the stack, but the pushd and popd builtins must be used to add and remove directories.

Assignment to this variable will not change the current directory.

If this parameter is unset, it loses its special properties, even if it is subsequently reset.

Expands to the number of seconds since Unix expoch as a floating point value with micro-second granularity.

Assignments to this parameter are ignored. If this parameter is unset, it loses its special properties, even if it is subsequently reset.

Expands to the number of seconds since Unix expoch.

Assignments to this parameter are ignored. If this parameter is unset, it loses its special properties, even if it is subsequently reset.

Expands to the effective user ID of the current user, initialized at shell startup.

Do not rely on this variable when security is a concern.

An array variable containing the names of all shell functions currently in the execution call stack.

The element with index 0 is the name of any currently-executing shell function. The bottom-most element (the one with the highest index) is "main".

This variable can be used with BASH_LINENO and BASH_SOURCE: Each element of FUNCNAME has corresponding elements in BASH_LINENO and BASH_SOURCE to describe the call stack. For instance, ${FUNCNAME[$i]} was called from the file ${BASH_SOURCE[$i+1]} at line number ${BASH_LINENO[$i]}. The caller builtin command displays the current call stack using this information.

This variable exists only when a shell function is executing.

Assignments to this parameter have no effect and return an error status.

If this parameter is unset, it loses its special properties, even if it is subsequently reset.

An array variable containing the list of groups of which the current user is a member.

Assignments to this parameter have no effect and return an error status.

If this parameter is unset, it loses its special properties, even if it is subsequently reset.

Expands to the history number (index in the history list) of the current command.

If this parameter is unset, it loses its special properties, even if it is subsequently reset.

Automatically set to the name of the current host.

Automatically set to a string that uniquely describes the type of machine on which Bash is executing.

Example content:

x86_64

Each time this parameter is referenced, the shell substitutes a decimal number representing the current sequential line number (starting with 1) within a script or function.

When not in a script or function, the value substituted is not guaranteed to be meaningful.

If this parameter is unset, it loses its special properties, even if it is subsequently reset.

Automatically set to a string that fully describes the system type on which Bash is executing, in the standard GNU "cpu-company-system" format.

Example content:

x86_64-unknown-linux-gnu

An array variable created to hold the text read by the mapfile builtin command when no variable name is supplied.

The previous working directory as set by the cd command.

The value of the last option argument processed by the getopts builtin command.

The index of the next argument to be processed by the getopts builtin command.

Automatically set to a string that describes the operating system on which Bash is executing.

Example content:

linux-gnu

An array variable containing a list of exit status values from the processes in the most-recently-executed foreground pipeline (which may contain only a single command).

The process ID of the shell's parent process.

The current working directory as set by the cd builtin command.

Each time this parameter is referenced, a random integer between 0 and 32767 is generated. The sequence of random numbers may be initialized by assigning a value to RANDOM.

If this parameter is unset, it loses its special properties, even if it is subsequently reset.

The contents of the readline line buffer, for use with bind -x.

The position of the insertion point in the readline line buffer, for use with bind -x.

Set to the line of input read by the read builtin command when no arguments are supplied that name target variables.

Each time this parameter is referenced, the number of seconds since shell invocation is returned. If a value is assigned to SECONDS, the value returned upon subsequent references is the number of seconds since the assignment plus the value assigned.

If this parameter is unset, it loses its special properties, even if it is subsequently reset.

A colon-separated list of enabled shell options. Each word in the list is a valid argument for the -o option to the set builtin command. The options appearing in SHELLOPTS are those reported as on by set -o.

If this variable is in the environment when Bash starts up, each shell option in the list will be enabled before reading any startup files.

Incremented by one each time an instance of Bash is started.

Expands to the user ID of the current user, initialized at shell startup.

Do not rely on this variable when security is a concern.

If this parameter is set when Bash is executing a shell script, its value is interpreted as a filename containing commands to initialize the shell, as in ~/.bashrc. The value of BASH_ENV is subjected to

• parameter expansion
• command substitution
• arithmetic expansion

before being interpreted as a file name.

PATH is not used to search for the resultant file name.

If set to an integer corresponding to a valid file descriptor, Bash will write the trace output generated when set -x is enabled to that file descriptor.

The file descriptor is closed when BASH_XTRACEFD is unset or assigned a new value.

Unsetting BASH_XTRACEFD or assigning it the empty string causes the trace output to be sent to the standard error. Note that setting BASH_XTRACEFD to 2 (the standard error file descriptor) and then unsetting it will result in the standard error being closed.

The search path for the cd builtin command.

This is a colon-separated list of directories in which the shell looks for destination directories specified by the cd command.

Example content:

.:~:/usr

Used by the select compound command to determine the terminal width when printing selection lists. Automatically set upon receipt of a SIGWINCH.

An array variable from which Bash reads the possible completions generated by a shell function invoked by the programmable completion facility.

If Bash finds this variable in the environment when the shell starts with value "t", it assumes that the shell is running in an Emacs shell buffer and disables line editing.

Similar to BASH_ENV: Used when the shell is invoked in POSIX® mode.

The default editor for the fc builtin command.

A colon-separated list of suffixes to ignore when performing filename completion. A filename whose suffix matches one of the entries in FIGNORE is excluded from the list of matched filenames.

Example content:

.o:~

If set to a numeric value greater than 0, defines a maximum function nesting level. Function invocations that exceed this nesting level will cause the current command to abort.

Negative values, 0 or non-numeric assignments have the effect as if FUNCNEST was unset or empty: No nest control

A colon-separated list of patterns defining the set of filenames to be ignored by pathname expansion. If a filename matched by a pathname expansion pattern also matches one of the patterns in GLOBIGNORE, it is removed from the list of matches.

A colon-separated list of values controlling how commands are saved on the history list:

Any value not in the above list is ignored.

If HISTCONTROL is unset, or does not include a valid value, all lines read by the shell parser are saved on the history list, subject to the value of HISTIGNORE. The second and subsequent lines of a multi-line compound command are not tested, and are added to the history regardless of the value of HISTCONTROL.

The name of the file in which command history is saved.

If unset, the command history is not saved when an interactive shell exits.

The maximum number of lines contained in the history file.

When this variable is assigned a value, the history file is truncated, if necessary, by removing the oldest entries, to contain no more than the given number of lines. If the given number of lines is 0 (zero), the file is truncated to zero size. Non-numeric values and numeric values less than zero inhibit truncation.

The history file is also truncated to this size after writing it when an interactive shell exits.

A colon-separated list of patterns used to decide which command lines should be saved on the history list. Each pattern is anchored at the beginning of the line and must match the complete line (no implicit '*' is appended).

Each pattern is tested against the line after the checks specified by HISTCONTROL are applied.

In addition to the normal shell pattern matching characters, "&" matches the previous history line. "&" may be escaped using a backslash; the backslash is removed before attempting a match.

The second and subsequent lines of a multi-line compound command are not tested, and are added to the history regardless of the value of HISTIGNORE.

The number of commands to remember in the command history.

If the number is set to 0 (zero), then the history list is disabled. If the number is set to any negative number, then the history list is unlimited.

If this variable is set and not null, its value is used as a format string for strftime(3) to print the time stamp associated with each history entry displayed by the history builtin.

If this variable is set, time stamps are written to the history file so they may be preserved across shell sessions. This uses the history comment character to distinguish timestamps from other history lines.

The home directory of the current user.

The default argument for the cd builtin command.

The value of this variable is also used when performing tilde expansion.

Contains the name of a file in the same format as /etc/hosts that should be read when the shell needs to complete a hostname.

The list of possible hostname completions may be changed while the shell is running. the next time hostname completion is attempted after the value is changed, Bash adds the contents of the new file to the existing list.

If HOSTFILE is set, but has no value, or does not name a readable file, Bash attempts to read /etc/hosts to obtain the list of possible hostname completions.

When HOSTFILE is unset, the hostname list is cleared.

The Internal Field Separator that is used for word splitting after expansion and to split lines into words with the read builtin command.

Controls the action of an interactive shell on receipt of an EOF character (e.g. by Ctrl-D) as the sole input.

If set, the value is the number of consecutive EOF characters which must be typed as the first characters on an input line before Bash exits.

If the variable exists but does not have a numeric value, or has no value, the default value is 10.

If it does not exist, EOF signifies the end of input to the shell.

The filename for the readline startup file, overriding the default of ~/.inputrc.

Used to determine the locale category for any category not specifically selected with a variable starting with LC_.

This variable overrides the value of LANG and any other LC_ variable specifying a locale category.

This variable determines the collation order used when sorting the results of pathname expansion, and determines the behavior of range expressions, equivalence classes, and collating sequences within pathname expansion and pattern matching.

This variable determines the interpretation of characters and the behavior of character classes within pathname expansion and pattern matching.

This variable determines the locale used to translate double- quoted strings preceded by a $.

This variable determines the locale category used for number formatting.

Used by the select compound command to determine the column length for printing selection lists. Automatically set upon receipt of a SIGWINCH.

If this parameter is set to a file or directory name and the MAILPATH variable is not set, Bash informs the user of the arrival of mail in the specified file or Maildir-format direc‐ tory.

Specifies how often (in seconds) Bash checks for mail.

When it is time to check for mail, the shell does so before displaying the primary prompt.

If this variable is unset, or set to a value that is not a number greater than or equal to zero, the shell disables mail checking.

A colon-separated list of file names to be checked for mail.

The message to be printed when mail arrives in a particular file may be specified by separating the file name from the message with a '?' (question mark).

When used in the text of the message, $_ expands to the name of the current mailfile.

Example content:

/var/mail/bfox?"You have mail":~/shell-mail?"$_ has mail!"

If set to the value 1, Bash displays error messages generated by the getopts builtin command.

OPTERR is initialized to 1 each time the shell is invoked or a shell script is executed.

The search path for commands. This is a colon-separated list of directories in which the shell looks for commands.

A zero-length (null) directory name in the value of PATH indicates the current directory.

A null directory name may appear as two adjacent colons, or as an initial or trailing colon.

There can be a static path compiled in for use in a restricted shell.

If this variable is in the environment when Bash starts, the shell enters posix mode before reading the startup files, as if the –posix invocation option had been supplied.

If it is set while the shell is running, Bash enables posix mode, as if the command set -o posix had been executed.

If set, the value is executed as a command prior to issuing each primary prompt.

If set, each element is executed as a command prior to issuing each primary prompt (like PROMPT_COMMAND, just as array).

If set to a number greater than zero, the value is used as the number of trailing directory components to retain when expanding the \w and \W prompt string escapes.

Characters removed are replaced with an ellipsis.

Expanded and displayed by interactive shells after reading a complete command but before executing it.

The value of this parameter is expanded and used as the primary prompt string. See Controlling the Prompt.

The value of this parameter is expanded as with PS1 and used as the secondary prompt string.

The value of this parameter is used as the prompt for the select command.

The value of this parameter is expanded as with PS1 and the value is printed before each command Bash displays during an execution trace. The first character of PS4 is replicated multiple times, as necessary, to indicate multiple levels of indirection.

The full pathname to the shell is kept in this environment variable. If it is not set when the shell starts, Bash assigns the full pathname of the current user's login shell.

A variable that delivers a 32bit random number. The random number generation uses platform specific generators in the background and a builtin fallback generator.

The value of this parameter is used as a format string specifying how the timing information for pipelines prefixed with the time reserved word should be displayed.

The % character introduces an escape sequence that is expanded to a time value or other information. The escape sequences and their meanings are as follows, the braces denote optional portions:

The optional modifiers (p and l) are:

If this variable is not set, Bash acts as if it had the value

$'\nreal\t%3lR\nuser\t%3lU\nsys%3lS'

If the value is null, no timing information is displayed.

A trailing newline is added when the format string is displayed.

If set to a value greater than zero, TMOUT is treated as the default timeout for the read builtin command.

The select command terminates if input does not arrive after TMOUT seconds when input is coming from a terminal.

In an interactive shell, the value is interpreted as the number of seconds to wait for input after issuing the primary prompt. Bash terminates after waiting for that number of seconds if input does not arrive.

If set, Bash uses its value as the name of a directory in which Bash creates temporary files for the shell's use.

This variable controls how the shell interacts with the user and job control. If this variable is set, single word simple commands without redirections are treated as candidates for resumption of an existing stopped job. There is no ambiguity allowed; if there is more than one job beginning with the string typed, the job most recently accessed is selected. The name of a stopped job, in this context, is the command line used to start it. If set to the value exact, the string supplied must match the name of a stopped job exactly; if set to substring, the string supplied needs to match a substring of the name of a stopped job. The substring value provides functionality analogous to the %? job identifier.

If set to any other value, the supplied string must be a prefix of a stopped job's name; this provides functionality analogous to the %string job identifier.

The two or three characters which control history expansion and tokenization.

The first character is the history expansion character, the character which signals the start of a history expansion, normally '!' (exlamation mark).

The second character is the quick substitution character, which is used as shorthand for re-running the previous command entered, substi tuting one string for another in the command. The default is '^' (carret).

The optional third character is the character which indicates that the remainder of the line is a comment when found as the first character of a word, normally '#' (hash mark). The history comment character causes history substitution to be skipped for the remaining words on the line. It does not necessarily cause the shell parser to treat the rest of the line as a comment.