Basic grammar rules of Bash

Bash builds its features on top of a few basic grammar rules. The code you see everywhere, the code you use, is based on those rules. However, this is a very theoretical view, but if you're interested, it may help you understand why things look the way they look.

If you don't know the commands used in the following examples, just trust the explanation.

Bash manual says:

A simple command is a sequence of optional variable assignments followed by blank-separated words and redirections,
and terminated by a control operator. The first word specifies the command to be executed, and is passed as argument
zero.  The remaining words are passed as arguments to the invoked command.

Sounds harder than it actually is. It is what you do daily. You enter simple commands with parameters, and the shell executes them.

Every complex Bash operation can be split into simple commands:

ls
ls > list.txt
ls -l
LC_ALL=C ls

The last one might not be familiar. That one simply adds "LC_ALL=C" to the environment of the ls program. It doesn't affect your current shell. This also works while calling functions, unless Bash runs in POSIX® mode (in which case it affects your current shell).

Every command has an exit code. It's a type of return status. The shell can catch it and act on it. Exit code range is from 0 to 255, where 0 means success, and the rest mean either something failed, or there is an issue to report back to the calling program.

The simple command construct is the base for all higher constructs. Everything you execute, from pipelines to functions, finally ends up in (many) simple commands. That's why Bash only has one method to expand and execute a simple command.

Missing an additional article about pipelines and pipelining

[time [-p]] [ ! ] command [ | command2 … ]

Don't get confused about the name "pipeline." It's a grammatic name for a construct. Such a pipeline isn't necessarily a pair of commands where stdout/stdin is connected via a real pipe.

Pipelines are one or more simple commands (separated by the | symbol connects their input and output), for example:

ls /etc | wc -l

will execute ls on /etc and pipe the output to wc, which will count the lines generated by the ls command. The result is the number of directory entries in /etc.

The last command in the pipeline will set the exit code for the pipeline. This exit code can be "inverted" by prefixing an exclamation mark to the pipeline: An unsuccessful pipeline will exit "successful" and vice versa. In this example, the commands in the if stanza will be executed if the pattern "^root:" is not found in /etc/passwd:

if ! grep '^root:' /etc/passwd; then
  echo "No root user defined... eh?"
fi

Yes, this is also a pipeline (although there is no pipe!), because the exclamation mark to invert the exit code can only be used in a pipeline. If grep's exit code is 1 (FALSE) (the text was not found), the leading ! will "invert" the exit code, and the shell sees (and acts on) exit code 0 (TRUE) and the then part of the if stanza is executed. One could say we checked for "not grep "^root" /etc/passwd".

The set option pipefail determines the behavior of how bash reports the exit code of a pipeline. If it's set, then the exit code ($?) is the last command that exits with non zero status, if none fail, it's zero. If it's not set, then $? always holds the exit code of the last command (as explained above).

The shell option lastpipe will execute the last element in a pipeline construct in the current shell environment, i.e. not a subshell.

There's also an array PIPESTATUS[] that is set after a foreground pipeline is executed. Each element of PIPESTATUS[] reports the exit code of the respective command in the pipeline. Note: (1) it's only for foreground pipe and (2) for higher level structure that is built up from a pipeline. Like list, PIPESTATUS[] holds the exit status of the last pipeline command executed.

Another thing you can do with pipelines is log their execution time. Note that time is not a command, it is part of the pipeline syntax:

# time updatedb
real    3m21.288s
user    0m3.114s
sys     0m4.744s

Missing an additional article about list operators

A list is a sequence of one or more pipelines separated by one of the operators ;, &, &&, or ││, and optionally terminated by one of ;, &, or <newline>.

⇒ It's a group of pipelines separated or terminated by tokens that all have different meanings for Bash.

Your whole Bash script technically is one big single list!

Note: POSIX calls this construct a "compound lists".

See also the list of compound commands.

There are two forms of compound commands:

• form a new syntax element using a list as a "body"
• completly independant syntax elements

Essentially, everything else that's not described in this article. Compound commands have the following characteristics:

• they begin and end with a specific keyword or operator (e.g. for … done)
• they can be redirected as a whole

See the following table for a short overview (no details - just an overview):

Missing an additional article about shell functions

A shell function definition makes a compound command available via a new name. When the function runs, it has its own "private" set of positional parameters and I/O descriptors. It acts like a script-within-the-script. Simply stated: You've created a new command.

The definition is easy (one of many possibilities):

<NAME> () <COMPOUND_COMMAND> <REDIRECTIONS>

which is usually used with the {…; } compound command, and thus looks like:

print_help() { echo "Sorry, no help available"; }

As above, a function definition can have any compound command as a body. Structures like

countme() for ((x=1;x<=9;x++)); do echo $x; done

are unusual, but perfectly valid, since the for loop construct is a compound command!

If redirection is specified, the redirection is not performed when the function is defined. It is performed when the function runs:

# this will NOT perform the redirection (at definition time)
f() { echo ok ; } > file

# NOW the redirection will be performed (during EXECUTION of the function)
f

Bash allows three equivalent forms of the function definition:

NAME ()          <COMPOUND_COMMAND> <REDIRECTIONS>
function NAME () <COMPOUND_COMMAND> <REDIRECTIONS>
function NAME    <COMPOUND_COMMAND> <REDIRECTIONS>

The space between NAME and () is optional, usually you see it without the space.

I suggest using the first form. It's specified in POSIX and all Bourne-like shells seem to support it.

Note: Before version 2.05-alpha1, Bash only recognized the definition using curly braces (name() { … }), other shells allow the definition using any command (not just the compound command set).

To execute a function like a regular shell script you put it together like this:

#!/bin/bash
# Add shebang

mycmd()
{
  # this $1 belongs to the function!
  find / -iname "$1"
}

# this $1 belongs the script itself!
mycmd "$1" # Execute command immediately after defining function 

exit 0

Just informational(1):

Internally, for forking, Bash stores function definitions in environment variables. Variables with the content "() ….".

Something similar to the following works without "officially" declaring a function:

$ export testfn="() { echo test; }"
$ bash -c testfn
test
$

Just informational(2):

It is possible to create function names containing slashes:

/bin/ls() {
  echo LS FAKE
}

The elements of this name aren't subject to a path search.

Weird function names should not be used. Quote from the maintainer:

• It was a mistake to allow such characters in function names (`unset' doesn't work to unset them without forcing -f, for instance). We're stuck with them for backwards compatibility, but I don't have to encourage their use.

• a simple command is just a command and its arguments
• a pipeline is one or more simple command probably connected in a pipe
• a list is one or more pipelines connected by special operators
• a compound command is a list or a special command that forms a new meta-command
• a function definition makes a compound command available under a new name, and a separate environment

more…

---

A (very) simple command

echo "Hello world..."

All of the following are simple commands

x=5

>tmpfile

{x}<"$x" _=${x=<(echo moo)} <&0$(cat <&"$x" >&2)

---

A common compound command

if [ -d /data/mp3 ]; then
  cp mymusic.mp3 /data/mp3
fi

• the compound command for the if clause
• the list that if checks actually contains the simple command [ -d /data/mp3 ]
• the list that if executes contains a simple command (cp mymusic.mp3 /data/mp3)

Let's invert test command exit code, only one thing changes:

if ! [ -d /data/mp3 ]; then
  cp mymusic.mp3 /data/mp3
fi

• the list that if checks contains a pipeline now (because of the !)

• Internal: List of compound commands
• Internal: Parsing and execution of simple commands
• Internal: Quoting and escaping
• Internal: Introduction to expansions and substitutions
• Internal: Some words about words...